Déan Teagmháil Linn
- Uimh.278, Qingxian Bóthar, Linglong Sráide, Líneann, Hangzhou, Zhejiang, tSín.
- fiona@foreverseal.com
- +8613732295276
White Full Density Ptfe Film For Cable
PTFE is a synthetic fluoropolymer that has excellent resistance to chemicals, heat, and electricity. It is widely used in various applications, including non-stick coatings, gaskets, and seals. However, the traditional PTFE film is not porous and can be difficult to work with in some applications. In the medical industry, white full density ptfe film for cable is used in various applications, including drug delivery systems, surgical implants, and medical filters. Its bio-compatibility, chemical resistance, and high porosity make it an ideal material for these applications.
Cur síos
PTFE is a synthetic fluoropolymer that has excellent resistance to chemicals, heat, and electricity. It is widely used in various applications, including non-stick coatings, gaskets, and seals. However, the traditional PTFE film is not porous and can be difficult to work with in some applications. In the medical industry, white full density ptfe film for cable is used in various applications, including drug delivery systems, surgical implants, and medical filters. Its bio-compatibility, chemical resistance, and high porosity make it an ideal material for these applications.
Specifications:
|
Thickness |
0.03 - 3mm (±0.005mm) |
|
Width |
4mm - 120mm |
|
Density |
2.15g/cm3 (±0.08g/cm3) |
Typical Properties:
|
Tensile Strength(min) |
35 MPa |
|
Elongation (min) |
120 % |
|
Operation Temperature |
-55℃ to +260℃ |
|
Dielectric Constant |
2.55 |
|
Dielectric Strength |
≥ 60 kv/mm |
|
Breakdown Voltage |
|
|
Flammability Rate |
VTM - 0 (UL 94) |
Packing details:
|
Width |
4mm - 25mm (0.156" - 0.876") Solid pack |
|
10mm - 120mm (0.375" - 8") Flat Pad |
|
|
Core Diamter |
76mm ( 3”) |
|
Max Roll O.D. |
280mm (11”) |
|
Packing type |
Flat or Solid pack |
Storing Recommendations for Unsintered Tapes
For maximum shelf life, it is recommended that PTFE films are stored in a clean, temperature-controlled environment at or below 21C with relative humidity below 50%.


- Our certificate


- Product Application

FAQ:
Customer: What is the ptfe film density available?
Foreverseal: Normally make it 0.5-0.9g/cm3 or 1.6g/cm3
Customer: What color ptfe film can you make?
Foreverseal: Normally it is white, and we can make it colorful if the quantity is large.
Customer: Is your ptfe film toxic?
Foreverseal: No, it’s not
B’fhéidir gur mhaith leat freisin

















